-Centrifugal pumps with horizontal shaft, split body, diffuser, multistage, closed impeller.
-11 models from DN 25 to DN 250 discharge flange diameter.
-Suction flanges according EN 1092 – 2 / PN 16 and discharge flanges to EN 1092 – 2 / PN 40 (PN 63). (flanges in pumps with stainless steel body material according to EN 1092-1 standard pressure class.)
-In standard production, the suction flange is on the coupling side and on the right side, the discharge flange at the other end and top (R 4/2). If flange positions other than standard manufacture are required, this request must be specified at the time of order.
-All impellers are balanced dynamically or statically in accordance with ISO 1940 class 6.3.
-Axial force is balanced by impeller balancing holes system.
-The direction of rotation is clockwise when viewed from the motor side.
-TAR type pumps use “grease lubricated” bearings as standard.

Multi Stage Pump Technical Data

Multi Stage Pump Applications:

-Power Plants
-Agricultural Irrigation and Drainage
-Oil Industry
-Building System
-Water Treatment and Pressurization
-Mining
-Chemial Industry
-Heating, Ventilating and Air Conditioning
-Fire Fighting
-Food and Beverage Industry
-Iron and Steel Indusrty