Sectional Valve

SECTIONAL VALVE

Properties

The TS-100 valve is assembled and tested as per the technical specification of this catalog.
Before the final installation on your equipment, follow the below recommendation:

  • The valve can be assembled in any position, in order to prevent body deformation and spool sticking mount the product on a flat surface;

  • In order to prevent the possibility of water entering the lever box and spool control kit, do not use high pressure wash down directly on the valve;

  • Prior to painting, ensure plastic port plugs are tightly in place.

Technical Data

Nominal Flow Rating / Displacement 100 l/min 26 U.S.G.P.M
Max. Working Pressure (Parallel Circuit) 315 Bar 4600 PSI
Max. Working Pressure (Series Circuit) 210 Bar 3050 PSI
Max. Back Pressure 25 Bar 360 PSI
Oil Temperature with NBR Seals -20 to 80 C -4 to 176 F˚
Oil Temperature with FPM (Viton) Seals -20 to 100 C -4 to 212 F˚
Number Of Spools 1 to 12
Tie Rod Tightening Torgue 30 Nm 22 Ibft

Your Success is Our Success