Sectional Valve

SECTIONAL VALVE

Properties

The TS-45 valve is assembled and tested as per the technical specification of this catalog.
Before the final installation on your equipment, follow the below recommendation:

  • The valve can be assembled in any position, in order to prevent body deformation and spool sticking mount the product on a flat surface;
  • In order to prevent the possibility of water entering the lever box and spool control kit, do not use high pressure wash down directly on the valve;
  • Prior to painting, ensure plastic port plugs are tightly in place.

Technical Data

Nominal Flow Rating / Displacement 45 l/min 12 U.S.G.P.M
Max. Working Pressure (Parallel Circuit) 315 bar 4600 PSI
Max. Working Pressure ( Series Circuit) 210 Bar 3050 PSI
Max. Back Pressure 25 Bar 360 PSI
Oil Temperature with NBR Seals -20 to 80 C -4 to 176 F˚
Oil Temperature with FPM (Viton) Seals -20 to 100 C -4 to 212 F˚
Number Of Spools 1 to 12
Tie Rod Tightening Torgue 30 Nm 22 Ibft

Your Success is Our Success